How to Change a Subaru Spare Key

If you have lost your Subaru car key, you should call a locksmith. Usually, they will cut keys for you for less than the dealer.

subaru key fob cost car keys are generally either smart "push-to-start" fob remote keys, or simply keys made of metal. The Fob key is equipped with an embedded chip and must be reprogrammed.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It can also open the trunk of your vehicle or the lift gate. These remotes make use of the keypad inside your car to communicate with your vehicle's computer.

Some models of Subaru offer a less-known feature called PIN Code Access. You can use a customized number sequence to start and unlock your car. Read the owner's manual to learn how to use this feature if you own a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop working, there's a high chance that the battery in the key fob is dead. The first thing you'll need to do is make sure that the key fob has new batteries and you can accomplish this with a small remote tester or a basic multimeter from your garage.

The next step is to remove the key fob from its case and inspect its circuit board for the transmitter. It will have one or two sets of 8-digit numbers, so jot down the first set so you will be able to remember it later. After you've done this, you can begin programming the key fob at home. The procedure to do this differs based on the make and year of your car but it's generally simple enough to accomplish by yourself.

Key Fobs

Subaru's latest models come with key fobs that not just open the doors, but also activate your lights, lock your gas cap, and start your car. This feature is especially useful if you have ever been at a gas station and your car wouldn't even start because the battery inside the key fob has died.

It is likely that your Subaru's key fob, whether it's old or new and can be replaced. It's important that you remember that more recent models with a high level of technological sophistication could require an outing to the dealer. With some effort and time, you can create your own replacement key fob.

Start by examining the circuit board that controls the transmitter on your key fob (instructions to open the case are provided in the owner's manual). There should be two or more serial numbers with 8 digits each. Keep the first set of numbers handy for later reference.

After that, get in the driver's seat. Close all the doors. Turn the key ten times to start your car, then switch off the engine. Press the lock button on your key fob, and then open the door. This will verify that your doors are working properly. Close the door, then remove the key. The chime should be heard from your vehicle again, signalling that the key fob has been programmed.

Ignition System

The key battery could be dead If your subaru impreza key keys don't work as they should. If you know how, you could replace subaru key fob the key fob's battery yourself. A replacement battery is cheap and easy to locate. If the key fob you have doesn't respond to your commands, there could be a different issue. To obtain a spare key, it's recommended to go to an authorized dealer. They'll ensure that the key is a genuine Subaru key that's covered by warranty. It will also be programmed to your vehicle. This is much simpler and safer than buying an aftermarket key from a business online.

The dealer is also able to cut a key for you if you provide your VIN number as well as evidence of ownership. The information provided will be used to code the new key so that it is recognized by your immobilizer. This procedure is more complicated than simply cutting a key, and dealers will typically charge a higher price for this service.

Once the new key has been programmed, you'll be able to switch it to your current key. It takes only five seconds where to get a subaru key made insert the new key, so keep your working key close to the ready. Once the security light stops flashing and you're able to remove the new key and test it to make sure that it's functioning correctly.

Battery Replacement

One of the most important features that makes subaru legacy replacement key fobs useful is their ability to turn on your car's power windows as well as sunroof with a single touch of the button. However, the battery in your Subaru key fob was not made to last forever and will eventually need to be replaced. This quick guide from Capitol Subaru will help you to change the battery yourself.

To begin you'll need to locate the small crevice within the seam that divides the back and front of your key fob. Using a small flathead screwdriver, you can break the seam open and reveal a small compartment inside which is the battery. Insert the new battery and make sure it's facing in the correct direction. Remove the old one. Once everything is assembled then you can use the new key fob to lock, unlock, and start your vehicle without difficulty!

Always have a spare set keys, particularly if the one you have is damaged or has gone missing. You can buy a new key at your local dealership or have it cut by locksmiths. Either way, it's important to get your key fob working correctly as soon as you can so that you can drive in a safe manner!