how to get a new subaru key fob to Change a Subaru Spare Key

Contact a locksmith if have lost subaru key fob your Subaru key. Usually, they can cut new keys for you much less expensively than the dealer.

Subaru car keys are usually either smart "push-to-start" fob remote keys or plain keys made of metal. The Fob key has an embedded chip that will need to be reprogrammed.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It also opens the trunk of your vehicle or the lift gate. These remotes function with a keypad inside your car to communicate with the computer system of your vehicle.

Some models of Subaru offer a little-known feature called PIN Code Access. You can make a custom number sequence to open and start your car. Go through the owner's guide to learn how to utilize this feature if you own a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop functioning, there's a good possibility that the battery in the key fob is dead. The first thing you'll want to ensure is that the battery is in good condition and you can accomplish this with a portable remote tester or an ordinary multimeter in your home garage.

The next step is to remove the key fob from its case and look at the circuit board of its transmitter. You'll be able to see one or two sets of 8 numbers. Note the first set so you can remember it. After you've done this, you can begin programming the key fob at home. The procedure varies based on the model and year your vehicle. However, it's usually simple enough to complete yourself.

Key Fobs

Subaru's newest models feature key fobs that don't just unlock doors, but also turn on lights, lock the gas cap, and even start the car. This is especially useful if you've encountered yourself at a gas station and your car wouldn't even start because the battery in the key fob has failed.

It is likely that your Subaru's key fob, whether it's old or new, can be easily replaced. Be aware that some of the more modern models, which have their advanced technology, might require visiting a dealer. However, with a little time and effort, you can get your replacement key fob ready to go at home.

Begin by opening the case, and then examining the circuit board of the transmitter. (Instructions on opening the case are usually found in the owner's guide). It should contain one or two serial numbers, each of which is 8 digits long. Write down the first number series and keep it handy to refer to in the future.

Then, sit in your driver's seat, and close all doors. Turn the key ten times to start your car, then turn off the engine. Press the lock button of your key fob, and then open the door. This will ensure whether your doors work correctly. Close the door, and then remove the key. You should hear your car chime again, indicating that the key fob is programmed.

Ignition System

The battery for the key could be dead if your subaru wrx keys keys aren't working as they should. If you have the knowledge, you can replace subaru key fob the battery of your key fob yourself. The replacement of the battery is affordable and easy to find. If the key fob doesn't respond to your commands, it may be due to a different issue. It's recommended that you visit a dealer to get a spare key. They'll guarantee that the key is genuine Subaru key that's covered by warranty and will be programmed to your vehicle. This is much easier and more secure than purchasing an aftermarket key from a website.

The dealer is also able to cut keys for you if you provide your VIN number and as evidence of ownership. This information will be used to encode the key replacement so that it can be recognized by your immobilizer. This process is more complex than cutting a new one, and the dealer will typically charge a higher price for this service.

Once the new key is programmed, it is possible to switch it to your existing key. It takes only five seconds to insert the new key, so keep your working keys close at your side. Once the security light ceases to flash, you can remove the new key and examine it to make sure it's functioning properly.

Battery Replacement

Subaru fobs are extremely beneficial because they can switch on the power windows and sunroofs of your vehicle with just one button press. But, the battery in your subaru duplicate key fob isn't meant to last forever. It will eventually require replaced. This quick guide from Capitol Subaru will help you to change the battery yourself.

To begin, you'll need to locate the small crack in the seam that separates the front and back of your key fob. Using a small flathead screwdriver, you can break the seam to reveal a small space inside which is the battery. Install the new battery and ensure it's facing in the correct direction. Remove the old one. Once everything is assembled and in place, you can use your new key fob to lock, unlock, and start your vehicle without difficulty!

Always have a spare set of keys, especially if yours is broken or has been lost. You can buy a new key from your local dealership or have it cut by locksmiths. In either case, it's vital to get your key fob working correctly as soon as possible to allow you to drive in a safe manner!