Peugeot 308 Key Fob Problems and How to Fix Them

If your peugeot boxer key replacement 308 key fob stopped working one day it could be due to a dead battery in the coin, water damage the receiver module or a malfunctioning electronic chip. Luckily, all of these are easy to fix, and you'll have your car back to normal in no time at all!

The key blade may become worn-out and cause an unusable car key. It is easy to fix this problem by visiting your local Car Key Man Auto Locksmith to have a new key for peugeot 207 blade fitted.

Battery

The key fob of your Peugeot 308 may die or become weak enough to not transmit a strong signal. This can cause the key fob to cease working, preventing you from locking and opening the doors, or even starting your engine. You'll need a replacement battery for your key fob to fix this.

You'll have to purchase a replacement battery from an auto parts store or a local hardware store. When you purchase the battery, make sure that it's brand new and hasn't been sitting on the shelf for a long time. A new battery will have greater capacity and will be able to send a more powerful signal to the car.

After replacing the battery, try unlocking and locking the doors of your peugeot 308 replacement Key by using the key fob. If the doors don't open it's likely that the receiver module inside the car is at fault. Your local peugeot expert key dealer can reprogramme the receiver module.

The internal chip of the key fob can also be damaged. It's possible to cause damage to your key fob when you drop it on the ground or expose it to moisture. Rubber seals that shield your chip from moisture could be worn out over time. This is especially true if you expose your key fob to water for long periods of time, such as submerging it in the ocean. To avoid this from happening, it's essential to keep your key fob free from moisture and never let it come in contact with water.

Water Damage

If your key fob gets wet, whether you dropped it into the pool or threw it into the puddle, don't believe it's a case of lost cause. While the key fob comes with rubber seals which should shield it from water, long-term exposure to water may lead to damage to its electronic chip. Since water is an excellent conductor, any water that makes it inside the key fob can cause a series of short circuits, which could eventually damage the chip. After taking the battery out, scrub the contacts with isopropyl Alcohol and dry it off completely before putting it back in.

A dead battery may be the reason your peugeot key replacement 308 won't start. Jumper cables are a great option to restart the engine when you have an extra car. If the battery is the issue and it is not working, it should be replaced.

A poor receiver in the car could also block it from receiving the signal from the keyfob. The key fob might be damaged or there may be an issue with the antenna, wiring, or the key fob itself. If you have a new key fob, it might need to be programmed into the vehicle. If you're unable to solve the issue, you should contact an expert technician. A trained technician in the field will be able to determine the issue quickly and then fix it right away.

Radio Interference

Signs like keys not being recognized or with a limited range usually indicate that there is an interference in the system. The interference can be transmitted or radiated, which is caused by speaker and power cables passing too close to electrical parts. In general, rerouting cables or moving them away from these components will resolve the problem.

It's unlikely that someone is monitoring your key fob's signals to take your car away, but it is possible that the signal has been masked by radio frequency interference. This is a simple problem to fix.

If you're having issues with your key fobs that aren't recognized, try an entirely new battery. Make sure the battery is of the correct size and type. Incorrectly sized batteries could harm the fob.

Certain alarm systems from the aftermarket and radar detectors use the same radio frequency as your key fob and could cause them to interfere with your key signals. Avoid attaching these devices to your key fob.

Pairing Issues

A car's remote keyless entry system includes a receiver that receives radio frequency signals from the key fob. It is not possible to start your car if this receiver is not functioning properly even if the key fob is working and is reprogrammable. The issue can be caused in a number different ways, such as the battery of the coin-cell being dead or water damage. The receiver could also be faulty due to a software issue or internal damage in the key.

One of the main reasons why your peugeot 208 key 308 key fob is not working is because the coin battery inside has failed. This battery can be easily replaced, but you must make sure that it is the correct battery for your keyfob. It is best to choose one that is the same size as well as voltage and specifications as the original.

Your Peugeot 308 keyfob may not function if it was connected to another vehicle. It is possible that you have accidentally given your key fob away to someone else or the key was used to unlock other vehicles. This can be resolved by reprogramming the key fob with an OBDII scan. This tool will usually ask you to provide certain details regarding the vehicle, such as the VIN or engine type, and it's essential to fill in the correct information.