How to Change a Subaru Spare Key

Get a locksmith in touch if you lose your subaru car keys replacement key. They can usually cut a new key for you for less than the dealer.

Subaru car keys are generally either smart "push-to-start" fob remote keys or basic keys made of metal. The Fob key will need to have its chip reprogrammed.

Keyless Entry System

The key fob can be used to lock and unlock your lost subaru key fob remotely. It also opens the trunk of your vehicle or the lift gate. The remotes use the keypad in your car to connect to the computer system inside the vehicle.

Certain models of subaru outback key offer a little-known feature called PIN Code Access. You can choose a personal number sequence to open and start your vehicle. If you own a newer Subaru Forester, Outback, Crosstrek, WRX, WRX STI, or Impreza that comes with this feature, make sure you check the owner's manual for instructions on how to make use of it.

It's possible that the battery inside the key fob has died. You can test the battery life of your key fob with an instrument that is portable or a multimeter you can find in your garage.

The next step is to remove the circuit board of the transmitter from the key fob, and then look at it. You will see two or three sets of 8-digits. Note down the first set so that you can recall it. After you've done this, you can begin programming your key fob at home. The procedure varies based on the year and model of your vehicle. However, it is usually simple enough to complete yourself.

Key Fobs

Subaru's newest models are all equipped with key fobs that don't just unlock doors, but also activate your lights, lock your gas cap, and even start your car. That last trick is especially helpful if you've been at the gas station only to find that your car isn't starting because the battery of the key fob has died.

If your Subaru is old or new, it's likely that the key fob can be replaced without difficulty. It's important to keep in mind that the most recent models that have a high level of technological sophistication might require an appointment at the dealership. With a little effort and time, you can make your own key fob replacement.

Start by examining the circuit board for the transmitter inside your key fob (instructions for opening the case should be provided in the owner's manual). It should contain two or three sets of serial numbers each of which is 8 digits long. Keep the first set of numbers on hand for future reference.

Then, get into the driver's seat and close the doors. Turn the key to start your car and then shut off after ten revolutions. Press the lock button on your key fob, and then open the door. This will verify that your doors are working properly. Close the door, then take the key off. You should hear the chime from your vehicle, signalling that the key fob is programmed.

Ignition System

If your Subaru keys aren't functioning as they ought to, it could be due to the fact that the battery is dead. If you know how, you can change the battery on your key fob yourself. A replacement battery is cheap and fairly easy to find. If the key fob doesn't respond to your commands there could be an issue with a different cause. To find a spare, it's best to visit replacing a subaru key dealer. They will guarantee that the key is a genuine Subaru key that's under warranty and it'll be programmed to your vehicle. This is a lot easier and safer than purchasing an aftermarket one from a website.

You can also ask the dealer cut a brand new key if you supply them with your VIN number and evidence of ownership. They'll use this information to code the replacement key in order to be accepted by your immobilizer. This is a more complicated process than cutting a key, and the dealership will charge you more.

Once the new key is programmed, you are able to switch it over to the working key. It takes only five seconds to insert the second key, which is why it's essential to keep a working key handy. Once the security light stops flashing and you're able to remove the new key and test it to confirm it's working correctly.

Battery Replacement

Subaru fobs are extremely beneficial because they can turn on the power windows and sunroof of your car with just a single button press. The battery in your Subaru fob wasn't made to last forever, and it will need to be changed eventually. This short guide from Capitol Subaru will help you to change the battery yourself.

To begin, you'll need to locate the tiny crevice inside the seam that separates the back and front of your key fob. You can open this seam with the flat-head screwdriver, which will reveal the small compartment that contains the battery. Take out the old battery and then put in a new one, making sure it is facing the right side upwards. Once everything is assembled, you can use your new key fob to lock or unlock your vehicle effortlessly!

It's always recommended to have an additional set of keys at hand in case you've Lost Subaru Car Keys yours or it's not functioning properly. You can purchase a new key from your local dealership or have it cut by a locksmith. It's crucial to get your key fob operating properly as soon as you can so that you can drive in a safe manner!