peugeot 207 key 208 Key Replacement

peugeot van key replacement 208 key replacement should be left to experienced auto locksmiths who have the proper equipment and know-how. They can program and create keys more quickly and at a lower cost than dealers.

If your key fob stopped locking or unlocking your doors, it could be due to a dead coin battery. There are other causes that the key might be malfunctioning.

Dead Coin Battery

A dead coin battery will hinder your Peugeot 208 from locking or unlocking, and cannot start the engine. If this is the case, you'll need to make use of the backup starting procedure which is explained in the owner's manual to your vehicle.

The spark plugs can also be worn out. The spark plugs are responsible for instigating the fuel that starts the engine. They are only able to last for a short time. They'll eventually degrade when they aren't used enough.

There is an easy solution to this problem. Check the voltage of the battery using a multimeter. If it's less than 11.5 volts it is time to replace it. It is also necessary to clean the contacts of the battery when it has corrosion. This can be done by taking off the rubber covers from the two battery terminals and then using a wirebrush to eliminate any corroded battery parts. You should then reconnect the cables for the positive and negative poles.

Water Damage

If your 208 will not start and the battery hasn't failed, you should look at the spark plugs. You may find that they're filthy and don't spark. The spark plugs can be cleaned in a workshop.

Peugeot automobiles are equipped with a transponder compatible with the immobiliser. This ensures that only the correct key is able to start the engine. If the chip inside the Peugeot key is damaged, it won't send the proper signal to the vehicle.

Water damage is a typical cause of this issue. This is particularly common in colder climates, where the vehicle might have been exposed to rain or snow. If this is the case, you should get in touch with a reputable locksmith who will have all of the tools and equipment needed to reprogram the new key. They will also have the latest technology and the machinery needed to make a peugeot 108 key cover 208 smart key. The process should take no more than 15 minutes.

Contacts to the battery are not working properly.

Peugeot changed from the carbon-encased transponder chips and introduced a new type of chip that incorporates electronic components within a circuit board. The new system works great when it's new, however the circuit boards begin to degrade with time and cease to function properly.

This can prevent the immobiliser chip from triggering which means that your car won't start. Contact an Peugeot specialist, or a locksmith, if this is the situation.

Another common issue is when the key fob battery begins to fail, which causes the blade of the key to stop from entering the lock. A locksmith from your vehicle can replace the battery and cut a new blade for you, this is normally a quick fix.

Faulty Receiver Module

If your peugeot 207 key fob key fob isn't working after dropping it on the floor, getting exposed to a sudden downpour or accidentally washing it the wrong way, it could be due to a defective receiver module. The receiver module is responsible for transmitting radio frequencies to the onboard computer which regulates the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals which prevent water from reaching the electronic chip inside. However, prolonged exposure to water can penetrate these seals and damage the chip. The high salt content in the ocean water or pool could cause damage to the key fob, especially if it is submerged.

The module needs to be replaced if your Peugeot spare key does not work anymore. This can only be completed by an experienced auto locksmith or Peugeot specialist. Peugeot keys unlike other automobiles, are secured by an immobilizer system. This requires the correct code to begin the car. This is why it is imperative that you should only rely on an authorized Peugeot locksmith to design and program the replacement.

Computers with faulty on-board computers

The on-board computer of your Peugeot is responsible for many of the features in your car, including airbags and power windows. The on-board computer will show an error code when something goes wrong. This code is stored inside the system and stays there until the issue is solved. In most cases, this will require replacing the computer on board.

One of the main reasons for the airbag light flashing is loose or corroded connections in the airbag sensor. This can occur due to wear and tear, aging or exposure to salt and moisture. It is imperative to have this issue resolved as soon as you can, since a malfunctioning airbag can be dangerous in the event an accident.

If your Peugeot is showing a card that is not being detected error then the key battery inside the key fob may be weak or dead. This could prevent the key fob from transmitting a signal that will disable the standard immobilizer in your vehicle. You can test this by pressing the unlock button on the key fob, then attempting to start your vehicle. If this fails then the battery in the key fob needs to be replaced.