Usage

Adaptor

The adaptor is set onto the drive until it clicks into the quick clutch of the pistol. Finally it has to be fixed with a clamp bolt.
It is important that the inflow of the washing fluid is located at the top side of the driling machine to provide free access to the trigger of the drilling machine. The quick-action collet chuck is opened by holding tight the cap nut with one hand while switiching on the drilling machine counter-clockwise. While setting in the diamond grinder, the nuts must snap into place with an audible click. The quick-action collet chuck is locked by holding tight the cap nut with one hand while switching on the drilling machine clockwise. The grinder is now tightly fixed in the adaptor.

Internal washing

The precondition for a long life of the grinding system and for obtaining vital bone cylinders is an effective internal washing, which provides sufficient cooling of the diamond head and flush of sludge/Schleifschwamm. The washing fluid is connected with the cannula by the aid of a commonly used infusion system. To quarantee continual flushing during grinding, pressure perfusion using a pressure cuff is recommended. Prior to each grinding process, proper operating of the flushing system should be ensured. To meet the requirements for a long enduring function of the grinder system and to get vital bone cylinders it is necessary to have an effective internal flush. This flush provides an effective and sufficient chilling of the diamond rim an a draining of abrasives. The washing/rinsing fluid is connected to the luer lock by an usual infusion system. To secure an continous rinsing of the fluid during the grinding it is recommended to use a pressurized perfusion by means of a pressure cuff. Before grinding the flux of the rinsing fluid has to be checked.

Harvesting of a bone cylinder

The adaptor is set onto the drive until it clicks into the quick clutch of the pistol. Finally it has to be fixed with a clamp bolt. It is important that the inflow of the washing fluid is located at the top side of the driling machine to provide free access to the trigger of the drilling machine. The quick-action collet chuck is opened by holding tight the cap nut with one hand while switiching on the drilling machine counter-clockwise. While setting in the diamond grinder, the nuts must snap into place with an audible click. The quick-action collet chuck is locked by holding tight the cap nut with one hand while switching on the drilling machine clockwise. The grinder is now tightly fixed in the adaptor.

Bone-Cartilage-Transplantation

The adaptor is set onto the drive until it clicks into the quick clutch of the pistol. Finally it has to be fixed with a clamp bolt. It is important that the inflow of the washing fluid is located at the top side of the driling machine to provide free access to the trigger of the drilling machine. The quick-action collet chuck is opened by holding tight the cap nut with one hand while switiching on the drilling machine counter-clockwise. While setting in the diamond grinder, the nuts must snap into place with an audible click. The quick-action collet chuck is locked by holding tight the cap nut with one hand while switching on the drilling machine clockwise. The grinder is now tightly fixed in the adaptor.
For filling of primary donor defects we recommend Tutobone.