How to Program a Subaru Replacement Key

The dealer will charge to program a new key fob if you lose it or if it stops working. It can be done for less money by locksmith.

This is a common issue. The first thing to look at is the battery. Replace it with a replacement that is the same type, size, and voltage as the original.

How to Replace your Keys

If your Subaru has a smart key, or transponder chip key, it's essential that you visit the dealer to program it. If your subaru remote key has a non-transponder steel key, then you are able to do it yourself using a little bit of work and a few tools most people have at hand.

The case's exterior can be opened up the key fob with an abrasive screwdriver and a flathead key. The small tab is located in the seam between front and back of key fob's enclosure. This will let the interior smaller casing, which houses the battery. Utilize the screwdriver to unlock the casing, and then locate the new 2025-sized battery inside. Remove the old battery, insert the new one, and snap the two sides of the fob to each other.

Now, get in your vehicle and shut all the doors, save for the driver's door. Switch your key to the first position where the electrical system turns on, but the engine remains off, and then to the off position. Repeat this 10 times in rapid succession, and you'll hear an alarm sound. After that you'll have 45 seconds to program the 8-digit serial number into the computer of your vehicle using the locks and unlocks on the driver's side door. The dome lights will flash to indicate confirmation of the successful programming.

Remote Keys

A remote key is a remote control that can be used to unlock and start your car. It can also operate the alarm system, lock and unlock the doors, and open the trunk. It can be programmed with a key fob or through the mySubaru app. In certain states, you might have to get an ignition key and program it to meet the requirements of laws that prohibit cars from being left in motion when they are parked.

The service is not always cost-effective. Locksmiths can provide remote start services at your place of business. The disadvantage of hiring a professional locksmith is that they'll normally charge more than the dealership for their services.

When you find a locksmith that offers the right remote start services, it's important to verify that they're insured and licensed before hiring them. You should also make sure they have the proper equipment for the job. This will ensure that the locksmith can program your keys properly. If they fail to do this it could cause problems in the future, when trying to start your car or even locking yourself out. Make sure that the emergency key you have received works on your door cylinders as well as the trunk to avoid future issues.

Transponder Keys

Subaru cars come with numerous useful tech features to help you stay connected. STARLINK Multimedia allows you to stream content and listen to music while driving.

The key fob that is used for the Subaru Forester, Outback, Crosstrek, WRX, and STI has a tiny chip that sends a signal to your car's engine computer when you use it to unlock or start the vehicle. This chip has a unique code that is linked to a specific vehicle.

If you've lost your key fob, or is not working, take it to an authorized Subaru locksmith or dealer who has the code to reprogram it. They'll also make you new keys that work in the door and trunk locks, allowing you to still get into your car if your key battery is dead.

If you're visiting a locksmith or dealership ensure that you inform them your car's VIN (Vehicle ID Number) and the year. The VIN is located on the dashboard or in a prominent spot. It will help the locksmith or dealer verify that they have the appropriate key fob as well as key to program your Subaru.

Keyless Entry

You can start your Subaru impreza key remotely if you have a subaru duplicate key with keyless entry. This can be a huge advantage if you're planning to go on a hike without having to carry your keys to the car or go out for a drive in the snow and need to warm up the engine before heading out on the highway.

You'll need to have a smart key or replacement key fob to allow you to use this feature, however the procedure of programming it is simple and simple. You'll need to know the 8-digit number on your key fob. If you're unable to remember it, make a note of it.

After you've set up your pin code, you can unlock your car's doors with pressing the button on the key fob of your car or on your car's trunk release or lift gate locks. You can put your keys in the car while you go on an excursion, or take your children out to play. When you return, enter the 5-digit code to unlock the door and enter the vehicle.

If you're interested in adding keyless entry to your vehicle, there are kits available for installation by yourself. However professional installation is recommended to ensure that the system is properly installed and operates as intended.