How to Program a Subaru Replacement Key

If you lose your key fob or it stops working the dealer will charge you to program the new one. It is possible to get it done cheaper by a locksmith.

This is a typical issue. The first thing to check is the battery. Replace the battery with one of the same size, type, and voltage.

how much to replace subaru key to replace your Keys

If your Subaru has an intelligent key or transponder key, you'll be required to visit a dealer to program it. If your Subaru has a metal key that does not have a transponder chip you can program it yourself using a few simple tools and a bit of work.

First, open the key fob's exterior case using a steel key and a flat-head screwdriver. Find the small tab at the seam between the front and back of the key fob's encasement, and press it. This will release the smaller, inner casing that contains the battery. Unlock the casing using the screwdriver and search for the new 2025 batteries within. Remove the old battery, and then insert the new one. The two sides should be snagged back together.

Close all the doors, except the driver's. Change your key to the first position, which is where the electrical systems turn on, but the engine remains off, then turn it back to the off position. Repeat this 10 times in rapid intervals, and you'll hear an alarm sound. Once that happens, you have 45 seconds to program the 8-digit serial number into the computer of your vehicle by pressing the locks and unlock buttons on the driver's side door. The dome lights will flash in confirmation of successful programming.

Remote Keys

A remote key is a small remote control used to unlock and start the engine of your car. It can also be used to operate the alarm system and to lock or unlock doors, and even open the trunk. It can be programmed with keys or the mySubaru App. In some states, you'll have to get a key and then program it to comply with laws that prohibit cars from being left in motion when they are in a parking.

The service isn't always affordable. Locksmiths can offer remote start services at your place of business. The disadvantage of using a locksmith is that their fees are typically higher than those offered by the dealership.

Before you choose locksmiths who offer remote start services that are appropriate for your vehicle, be sure they're insured and licensed. Also, make sure that they've got the right equipment to perform the task. This will ensure the locksmith can program your keys correctly. If they are unable to do so, you may have problems in the future, when trying to start your car or locking yourself out. Verify that the emergency keys you received works on the door cylinders as well the trunk, to avoid future issues.

Transponder Keys

subaru remote key cars are equipped with many useful technology features that help you stay connected. STARLINK Multimedia allows you to stream audio and video while driving.

The key fobs for Subaru Forester Outback Crosstrek WRX and STI include a tiny chip that sends a message to the engine computer of your vehicle whenever you use them to start or unlock it. This chip has a unique code that is linked to a specific vehicle.

If you've lost the key fob, or it isn't working, bring it to an authorized subaru lost keys dealer or locksmith who has the key fob's code to reprogram it. They'll also cut you a new emergency key that works in both the trunk and door cylinders, so you can drive away when the battery in your key fob is dead.

When you're at the dealer or a locksmith, make sure they know the model, year and VIN (Vehicle Identification Number). The VIN can be found on the dashboard and is prominently displayed. It helps the locksmith or dealership verify that they have the correct key fob and key to program your subaru key locked in car.

Keyless Entry

You can start your subaru key fob remotely if you have a Subaru that has keyless entry. If you're planning to go on a hike and don't want to carry keys, or you need to warm up your engine prior to driving through snow, this could be a huge help.

You'll need a smart key or a replacement key fob with you to use this feature, however the process of programming it is quick and simple. You'll need to know the first 8-digit code that appears on your key fob, so be sure to note it down or record it in case you're having difficulty remembering.

After you have setup your pin code, you are able to unlock the car's doors by pressing a button on your key fob or trunk release or liftgate lock buttons. You can leave your keys in your car while you go on an excursion, or take your kids out to play. When you return, you can enter the five-digit code unlock and get into the vehicle.

If you're interested in adding keysless entry to your car There are kits for installation by yourself. However it is recommended to hire a professional to ensure that the system is properly installed and works as intended.