Subaru Impreza Key Problems

Subaru Impreza keys permit owners to lock and unlock their vehicles with a simple push of the button. A dead battery on the key fob is a common reason for the key fob to not function.

It is easy to change the battery. Find the small unit that houses the round, flat cell inside the casing of the key. Open it and replace the battery, ensuring that the correct side is facing forward.

Keys stolen or lost subaru key fob

We've all been there where you reach into your pocket to grab keys, but they are nowhere to be seen. Luckily, it's not difficult to locate your Subaru keys, and there are many ways to replace them quickly and at a low cost.

If you own a normal metal key that you want to use, bring it to a hardware shop or locksmith that stocks Subaru blanks (these are usually marked with "Subaru") and get them duplicated. If they want to replace the battery on the key fob, you can find a CR-2032 in most hardware stores or online retailers such as Amazon.

For the key fob or remote/intelligent key, you'll need go to a dealer or an automotive locksmith who can make new keys for your Subaru model. This can cost between $50-$250, depending on whether your Subaru comes with a transponder chips or smart key feature.

To have a new key programmed, you'll have to give the locksmith or dealer your vehicle identification number (VIN), which is located on the dashboard near the windshield. This number is needed to confirm your car's warranty status and that the key is correct for your Subaru model and year. The VIN includes details about the company and the country where to get a subaru key made the car was manufactured. It also reveals if there are any special features in the car such as immobilizers which hinder the engine from starting in the event that a wrong key is used.

Faulty Key Fob

There are a variety of reasons why a key fob doesn't function correctly. It could be as straightforward as a battery issue or a more complex repair. A dead battery, programming problems in the car or problems with the electrical system in the vehicle are some of the most frequently encountered issues with a Subaru keyfob.

One of the most simple fixes is to replace the key fob battery. They are available at hardware stores, as well as big box retailers. They are priced at around $10 and are easily replaced in just a few seconds. How to do this is in the owner's guide. There are numerous YouTube videos that can walk you through the procedure.

Damage to the key fob is a different possible cause. The metal clips that keep the batteries in place can be damaged if you take it out of your pocket and get it wet. If the key fob is still experiencing issues after replacing the battery, the problem could be due to the circuit board for the transmitter or other components in the vehicle. A skilled technician can look at these and troubleshoot the vehicle to find the problem. They can re-program the key fob and ensure that it works with the vehicle. They can also look for antenna or wiring issues which could stop the key fob from transmitting signals correctly.

Locking or Unlocking Issues

There are a variety of possibilities for the Subaru Impreza's key fob not locking or unlocking the doors. This issue could be caused by a dead battery, a malfunctioning module as well as signal interference or water damage. To remedy this, you can go to an authorized locksmith or a dealer to get the key fob reprogrammed.

If you are unable to access the trunk, the key fob may have the trunk lock setting set to "on". This is a security feature that prevents thieves from stealing the vehicle. Contact your SUBARU dealer to alter the settings of the trunk lock/unlock.

A locked steering column can also happen when a vehicle locks automatically following a sharp turn. This happens when the vehicle detects a sharp turn, which can affect its transmission system and engine. Be careful when turning to avoid this.

Make sure that the dealer or locksmith has programmed and cut the spare keys or replacement keys you have. Also, ensure that the emergency key works on each of the door cylinders and trunk, as these are the only ways to enter the vehicle if locked out. Make sure that the spare or the new subaru key fob key doesn't have any marks or scratches on it.

Keyless Entry

Many Subaru models come with keyless entry. This lets you lock or unlock the trunk and doors by pressing a button on the remote. The system utilizes radio signals to communicate with the vehicle when you are within range. There are numerous different systems that offer this functionality. They range from simple systems that open only the driver's door, to more advanced ones that offer remote start and smartphone connectivity.

The convenience of keyless entry on your Subaru is convenient and secure However, it's essential to know what to do in the event that the buttons stop working properly. You can try troubleshooting yourself, but it could be necessary to have your Subaru evaluated by a professional. In the meantime, use these tips to keep your car's remote functioning as intended.

If the key fob of your Subaru gets wet, it's a great idea to wipe the electronic chip off it with isopropyl alcohol and let it dry completely before you put the battery back in. This will stop moisture from damaging your fob or causing issues in the future.

If your key fob isn't responding, you can switch off the engine by opening the driver's door. Press the door button once to open it, and then press it again to close it. You'll have to press the button a handful of times in a row, usually one for each digit until you hear the chime. Then, repeat the procedure with each door until you get a response from all of them.